Webinar: Moisture Sorption and Drying Kinetics by DVS Analysis
188 Views •Webinar: BET Surface Area Measurements by Sorption Methods at Ambient Conditions
208 Views •Webinar: Surface energy analysis for measuring physicochemical properties of materials
833 Views •Webinar: Understanding Isotherm Shape and Isotherm Modelling from DVS Experiments | Dr. Daniel J. Burnett
1271 Views •Webinar: Particle Engineering in Pharmaceutical Solids Processing
2930 Views •Seminario web: Métodos experimentales para la captura de CO2 en presencia de vapor de agua
2664 Views •Workshop: Sorption Science Innovations in Cellulosic Material Characterization
2604 Views •Webinar: Challenges on specific surface area analysis of cellulosic materials
2269 Views •Webinar: Study of particle cohesion/adhesion and wettability of powders and formulations | Prof. Williams
2242 Views •Particle Engineering in Pharmaceutical Solids Processing
1615 Views •Online Workshop: Application of sorption science in food research
1526 Views •Webinar: Understanding Isotherm Shape and Isotherm Modelling from DVS Experiments | Dr. Daniel J. Burnett
1271 Views •Webinar: The Effect of Surface Properties on Granulation Performance
1211 Views •Webinar: The Importance of Moisture in Pharmaceuticals and Food Materials by Surface Energy
1088 Views •Webinar: Surface energy analysis for measuring physicochemical properties of materials
833 Views •Webinar: Analysis of Food Products by Dynamic Vapour Sorption
790 Views •Webinar: The Surface Properties and Water Adsorption Behaviour of Hair Fibers
719 Views •Webinar: Polymer characterization by Vapor Sorption Methods with Dr. Daniel Burnett
461 Views •Webinar: Capture of Hydrogen Sulphide and Sulphur Dioxide in MOFs
392 Views •Webinar: Water Sorption and Gas Adsorption Measurements on MOFs
384 Views •Dynamic Vapor Sorption (DVS) Applications for Amorphous Content Calculations & in situ Raman studies
300 Views •Webinar: Experimental Methods for Determining Carbon Dioxide Capture in the Presence of Water Vapor
277 Views •Webinar: Battery Electrode Active Materials Characterization
257 Views •Workshop: Characterizing Construction Materials by Vapor Sorption Techniques
241 Views •Webinar: BET Surface Area Measurements by Sorption Methods at Ambient Conditions
Traditional BET surface area measurements are typically performed by volumetric, gas sorption techniques. These methods require exposing the material of interest to very low pressures (10-3 Torr and below) and cryogenic temperatures (77K). These conditions can have deleterious affects on many classes of materials; including pharmaceuticals, foods, cellulose-based samples, and natural ingredients. In particular, low pressures and temperatures can cause structure collapse or phase changes on fragile solids. Flow-based sorption techniques, like Dynamic Vapor Sorption (DVS) and Inverse Gas Chromatography (IGC) can be performed at atmospheric pressure and room temperature. These techniques can be used to determine BET surface areas at industrially relevant and environmental storage conditions. In addition, these techniques can be performed over a wide range of relative humidity conditions, which allow surface characterization and determination of surface areas at ‘real-world’ conditions.
This educational seminar overviews the BET surface area principle by DVS and IGC. Also, it compares results with volumetric measurements and highlight the application of DVS and IGC surface area measurements on a range of materials.
Commenting is not enabled on this course.